Simplify 3d ender 3 profile how to#
Simplify 3d ender 3 profile install#
Simplify 3d ender 3 profile manual#
Simplify 3d ender 3 profile pro#

I do not have affiliation with any of these authors except myself lolI am simply providing access to the files I used to set up my printer. I will be linking to a bunch of different 3D print files that I found on Thingiverse.

Simplify 3d ender 3 profile manual#

Sorry that I did not take pictures of the assembly process, but the process is straight forward and the images in the instruction manual are easy to understand. Once that is completed, you only have a few more bolts to tighten up and a couple of wires to plug in and your printer is ready to start printing. The gantry will control the X left and right and Z up and down axis movement. Then you connect the gantry arm to the uprights. Once you unpack everything you will need to attach the uprights to the base. Fortunately several decades of assembling Lego kits served me well in figuring out what needed to be done. The instructions that come with the printer do not have words, just pictures. To finish putting the printer together will require connecting the remaining parts to the base using less than 2 dozen bolts, and then plugging up a few wires to the various motors. The base of the printer containing the print bed and the Y axis back and forth control as well as most of the wiring are already assembled before leaving the factory.

Simplify 3d ender 3 profile pro#

I used Devil Design Galaxy Black PLA profile at 0.The Ender 3 Pro comes partially assembled. I printed Lord Nibbler from Cults to test the PLA profile. Print Quality with the IdeaMaker profilesД«elow, I attached a few test prints done with the IdeaMaker profile for Sapphire Plus.

If you followed the steps, now your IdeaMaker profile for Sapphire Plus should be loaded and you can slice your first model.

In the Import Slicing Template screen, make sure you check the buttons like in the screenshot below then click OK.

Select the Sapphire profile вЂ“ 3DPrintBeginner.bin file previously downloaded.

Click on the вЂњPlayвЂќ button on the left side, then click on More and finally Import.

Open IdeaMaker and cancel the Configuration Wizzard.

Simplify 3d ender 3 profile install#

Download and install the IdeaMaker slicer from Raise3D website, then select the appropriate version according to your operating system.In order to install the IdeaMaker profile for Sapphire Plus, please follow the steps below:

Simplify 3d ender 3 profile how to#

Sapphire Plus вЂ“ IdeaMaker TPU profile вЂ“ 3DPrintBeginner How to install the IdeaMaker profile for Sapphire Plus Sapphire Plus вЂ“ IdeaMaker PETG profile вЂ“ 3DPrintBeginner Sapphire Plus вЂ“ IdeaMaker PLA profile вЂ“ 3DPrintBeginner You can download the IdeaMaker profile for Sapphire Plus from the links below: The TPU profile is set up with 215C for the hotend and 50C for the heatbed. This is done in order to minimize issues with adhesion.

This is done in order to minimize issues with adhesion.ДЇor the PETG profile, nozzle temperature is set to 230C, bed temperature is set to 70C.ДЇan speed is set to 0 for the first layer, 10% for the second layer and 30% starting from the 3rd layer. Nozzle temperature is set to 205C and bed temperature is set to 50C.ДЇan speed is set to 0 for the first layer, 50% for the second layer and 100% starting from the 3rd layer. The PLA profile can be used out of the box with this material. You can start with a 4.5 mm retraction value and work your way from there.

If you are planning to use the same profiles on your stock Sapphire Plus, retraction needs to be tuned for a bowden setup. (you can read more about the setup I used in the Sapphire Plus review) The IdeaMaker profile for Sapphire Plus is tuned to work well with a Direct Drive configuration and a V6 hotend. 4 Wrapping Up IdeaMaker profile for Sapphire Plus